Residential Polyaire ZoneMaster Controllers - Aircor Mechanical Services / Air-conditioning Specialists Mandurah Western Australia. For air conditioning systems, units, evaporative, refrigerated and ducted air conditioning services and repairs, residential air conditioning, and commercial air conditioning in Mandurah / Perth, Western Australia.

Polyaire Zonemaster Controller Systems

UniPoint System:

The UniPoint System makes any ducted system more efficient by allowing air flow to rooms being used and stopping wasteful flow to unused spaces. One wall mounted controller is used to turn selected dampers on and off so that the available air flow is confined only to the rooms where it is needed.

Imagine you are sitting in the lounge after dinner and the kids have gone to bed. It’s been a hot day and everyone will need maximum cooling to get a good night’s rest.

You use your Zonemaster UniPoint control to shut off all zones except the bedrooms.

Restricting the airflow to the areas you need increases the available cool air and doesn’t waste power on cooling unoccupied rooms.

Maximum cooling for a comfortable night.

The Multi-Zone Variable Air Volume (VAV) System:

The Zonemaster VAV is a sophisticated Air Conditioner Management System that regulates temperature in each zone (both heating & cooling) by varying the volume of airflow from the Air Conditioning Unit.

It uses advanced electronics to continually sense the temperature in each zone and regulate the amount of cool or warm air so that the preset temperature is maintained.

You may have a room in full sun and a study on the shady side of the house yet you want a similar temperature in both rooms.

You program the VAV to the desired temperatures for each zone and the system will do the rest, varying the airflow to maintain the temperature you want in each room throughout the day.

The VAV system is directing the available airflow where it is most needed, creating greater levels of comfort and efficiency.

An investment in a Zonemaster VAV can mean considerable savings in the size of the air conditioning unit needed and further savings through efficiency of flow management.

The MaxiPoint System:

Any house, office or other space consisting of various rooms can, for the purpose of Air Conditioning Efficiency, be divided into sections (Zones) and the air flow to each controlled by a motorised damper(s) that will, in turn, better manage temperature level.

These Zones could include:

Day & Night Zones
Separate Usage Zones (Kitchen & Lounge/Kitchen & Bedrooms/Kitchen & Dining/Games)
Specific Work Usage (Offices/Boardroom)

The air conditioned space can then be selectively regulated via the dampers so that only the spaces in use have airflow.

The RF UniPoint System is an on/off controller for up to 8 zones (Similar to the wall mounted UniPoint);

Features:

Manual and programmable on/off time control
LCD indicator for zone status and parameter display
Real time clock with battery backup
Room temp display using on board sensor
5-1-1 zone on/off program (5 Weekdays + Sat/Sun)
Personalised zone labelling
Easy Installation (24 volt plug in)
Safety Protection
o Auto spill/ bypass – spill zone is forced open if all zones are switched off
o Temperature override– opens all dampers if air supply temperature is lower than the low limit or exceeds the high limit
o After power loss all zones automatically return to previous on/off state when power restored

maxipoint

For example:

When there is little need to heat or cool bedrooms that are not in use during the day
An office boardroom doesn't need continuous airflow when it may only be used once a week

By confining airflow to the spaces being occupied the Air Conditioning unit is allowed to work more efficiently and, because the whole volume of air is going into a smaller area, desired temperatures are reached quicker and maintained more easily. How well each zone can be regulated depends on the sophistication of the Damper control system being used.